National Measurement Institute (NMI)

Site

Measurement Standards Unit Laboratory, Perth

Accreditation No.

1

Site No.

15313

Date of Accreditation

05 Nov 2003

Address

456 Victoria Road
Malaga, WA 6090
Australia

measurement.gov.au

Contact

Mr Daniel Conway P: +61 (08) 62024016

Availability

Services conditionally available to external clients

Scope of Accreditation

Print scopes
Measurement Standards Unit Laboratory, Perth

ISO/IEC 17025 (2017)

Calibration

  • The uncertainty of measurement is reported as an expanded uncertainty having a level of confidence of 95% unless stated otherwise
Service Product Determinant Technique Procedure Limitations
Dimensional metrology - Engineering equipment and precision instruments Steel rulers and measuring tapes Length measurements Comparison with a reference standard

Engineering steel measurement rules

from 1 mm to 2 m

Capability

with Calibration and Measurement Capability of- 

0.007 mm from 1 mm up to 5 mm

0.009 mm from above 5 mm to 1 m

0.014 mm form above 1 m to 2 m
Mass - Determination of mass and calibration of weighing devices Gaming accessories Mass Gravimetric measurement against reference mass

From 1 mg to 2000 kg

Capability

Sporting equipment
Artifacts of unknown mass

With Calibration and Measurement Capability of - 


3 μg from 1 mg to 10 mg
5 μg from above 10 mg up to 200 mg
10 μg from above 200 mg up to 2 g
2 in 106 from above 2 g to 50 g
1 in 106 from above 50 g up to 25 kg
1 in 105 from above 25 kg up to 1000 kg
2 in 105 from above 1000 kg up to 2000 kg
Mass standards Mass Gravimetric measurement against reference mass

From 1 mg to 2000 kg

Capability

with Calibration and Measurement Capability of- 

3 μg from 1 mg to 10 mg
5 μg from above 10 mg up to 200 mg
10 μg from above 200 mg up to 2 g
2 in 106 from above 2 g to 50 g
1 in 106 from above 50 g up to 25 kg
1 in 105 from above 25 kg up to 1000 kg
2 in 105 from above 1000 kg up to 2000 kg
Volume and density - Industrial volumetric equipment and bulk storage Industrial volumetric proving measures; Standard measures - > 25 L Volume Volumetric transfer From 10 L to 1200 L

Capability

"
with Calibration and Measurement Capability of-

Industrial volumetric proving tanks

0.15% from 10 L up to 1200 L

Proving tanks

0.15% from 10 L up to 1200 L
 "
Volume Gravimetric From 0.1 mL to 1200 L

Capability

with Calibration and Measurement Capability of- 

Standard measures and Industrial volumetric proving tanks

0.007% above 2 L up to 1200 L

Proving tanks 

0.007% above 2 L up to 1200 L
Volume and density - Laboratory volumetric glassware and measures Pipettes; Standard measures - < 50 L; Volumetric glassware and measures Volume Gravimetric

From 0.1 mL to 2 L

Capability

with Calibration and Measurement Capability of- 

2 in 103 or 0.002 mL (whichever is greater) from 0.1 mL up to 1 mL;
1 in 104 or 0.004 mL (whichever is greater) from above 1 mL up 2 L

The only data displayed is that deemed relevant and necessary for the clear description of the activities and services covered by the scope of accreditation.

Grey text appearing in a SoA is additional freetext providing further refinement or information on the data in the preceding line entry.